Office : +603 – 2742 7468
Email : info@muser-my.com
Mon – Fri : 8:30AM – 5:30PM
Food Safety Expert | Laboratory Equipment | Test & Measuring Instruments
PCE Instruments PCE-CT 26FN Paint Coating Thickness | Muser

PCE Instruments PCE-CT 26FN Paint Coating Thickness Gauge

  • To measure the thickness of coatings on steel / iron and non-ferrous metals
  • Measuring range: 0 to 1250 μm
SKU: PCE-CT 26FN Category: Tag:

PCE Instruments PCE-CT 26FN Paint Coating Thickness Gauge

 

Features | PCE-CT 26FN Paint Coating Thickness Gauge

  • Immediately ready to measure
  • Wear-resistant sensor
  • V-groove for measurement on pipes
  • One-handed operation
  • ISO calibration optional
  • Incl. transport case
 

Description | PCE-CT 26FN Paint Coating Thickness Gauge

The material tester PCE-CT 26FN can measure non-destructive coatings (paints, plastics …) on steel / iron and non-ferrous metals. The material tester is ideally suited, for example, to detect accidental damage to the vehicle immediately. But also in the industrial sector, the PCE-CT 26FN material tester is used for incoming and outgoing inspection in order to be able to offer consistently consistent product qualities.

The ergonomically shaped material tester with integrated probe and very simple operation allows you to quickly determine measurement results with high accuracy. The material tester PCE-CT 26FN is designed for measurements of non-magnetic coatings such as lacquer, plastic, chrome, copper, zinc, enamel, etc. on steel and iron, as well as all insulating coatings such as lacquer, plastic, enamel, paper, glass, rubber etc. on copper, aluminium, brass, stainless steel and aluminium.

 

Application | PCE-CT 26FN Paint Coating Thickness Gauge

Simply place the material tester u. read the measured value. You can easily measure varnish and paint layers, plastic layers, chrome layers, copper plating, zinc layers, galvanizing, enamel … on steel, stainless steel, iron and similar materials. Non-ferrous metals (copper, aluminium, brass) and anodized aluminium.By means of the included standards you can adjust the material tester at any time. To do this, the material tester must be placed on one of the foils. Please make sure that the meter is seated straight / level. 

Technical Specifications

Measuring range0 ... 1250 μm (0 ... 49.2 mils)
Resolution1 μm (0.039 mils)
Accuracy± (3% + 2 μm) or ± (3% + 0.079 mils)
Smallest measuring surface5 x 5 mm / 0.2 in x 0.2 in
Smallest radius of curvatureConvex. 3 mm (0.1 in) / concave: 50 mm (2 in)
Smallest thickness of the base material         Fe: at least 0.5 mm / 0.02 in
NFe: at least 0.3 mm / 0.01 in
DisplayOLED display
Ambient temperature0 ... 50°C / 32 ... 120°F
Power supply2 x AAA battery 1.5V
Dimension100 x 52 x 29 mm / 4 x 2 x 1.1 in
WeightAbout 68 g / < 1 lb (without batteries)
 

Delivery Scope

  • 1 x Material tester PCE-CT 26FN
  • 2 x AAA batteries 1.5V
  • 1 x Set of calibration foils (5 pieces)
  • 1 x Fe standard block
  • 1 x NFe standard block
  • 1 x Transport case
  • 1 x User manual
 
Scroll to Top
×